1. CPU:ARM core processor
2. Driving motor:brushless DC motor ,long lifetime,1800
rotation/S,operation:0.25°
3. wing open time:0.2s
4. no fault operation times:3 milliion
5. working noise:<50db
6. Passage width:600mm
7. working temperature:-40~+70℃
8. working humidity:5%~95%
9. IP Grade: IP56(indoor and outdoor)
10. detection function:self-inspection function when power on,Zero
self-adjustment
11. wing will close automatically when power off, open
automatically when power on.
12. overcurrent and overvoltage detection:yes,protect motor more
stable
13. LED menu:yes,easy for debugging and control
14. alarm function:yes,(tailing,break-in and so on)
15. Passage LED:red means forbidding ,green means go through
"16. Passage model:
Two directions authorization passage
One direction (authorization or not ) passage"
17. electronic brake: abnormal lock with clutch
18. lighting protection design:three-level lighting protection
design
Parameter:
| Housing material | 304# stainless steel,thickness 1.2 mm. |
| Housing size | 1200*280*1000mm |
| Swing arm length | ≤900mm |
| Arm drive direction | Single direction or bi-direction |
| Work voltage | AC220V±10% V/50±10%HZ |
| Drive motor | Direct current motor200W/24V |
| Drive current | ≥10mA |
| Communication interface | Standard RS485 |
| Length | ≤1200m |
| Pass speed | 40 persons/minute(always open)25-30 persons/minute(always close) |
| Swing arm open,close time | 1-2 Seconds |
| Enter pass though status time | 3 seconds |
| Reset time automatically after fault | 10S |
Strictly QC
Quality is the life of our company!
1)10 QC with 3-5years working experience
2) Quality is controlled from source and by every stuff works in
below is the QC procedure:
Purchase, Machining Shop, Sheet metal workshop, Painting workshop;
→QC; →Warehouse; →Aging test; →Assembly plant.
High quality of production equipment as follow:
A. Powder coating Test equipment, testing the quality of the
powder, making sure the color does not fade in 3to 5 years.
B. High temperature aging test room, examining if the control panel
can the normally work in the high temperature situation.
C. Low temperature, humidity aging cabinet, examining if the
control panel can the normally work in the low temperature
situation.
D. Tin stove, welding the control board and electronic parts by
ourselves.
4) Low-Revising rate: the rate of the product return to repair is
1‰
OEM, ODM is considered
Production is one of the most important sections in our company.
To improve production efficiency , we bring in Japanese Amada Fully
automatic CNC punch press,CNC cutting bed,CNC bending machine,CNC
EDM,Lathe,Milling,Electrostatic spraying , Injection line equipment
and so on .
With 4 unit production lines, we have 8 workers on the lines at the
same time.
OEM, ODM are considerable.
